 |
|
|
|
|
 |
|
|
|
|
RC Puma from Heli-Factory built by Matthieu Carlin
Heli-Factory's rc Puma, shown above, built by Matthieu Carlin, has a 99" length. It is 29 1/2" high, 13" wide, and has a 98" rotor. Power
is by a turbine engine.
You can find the actual SA 330 here.
 RC Puma built by Helicrazy.
The rc Puma built by Helicrazy of Scale RC Helis. com has a length of 85" and uses a Jet Cat turbine engine to turn its 84" rotor.
 RC Puma from Tech Group.
The rc Puma from Tech Group comes ready to fly. Included is a radio, flight battery and charger. Length is about 10".
 RC Puma flown by Michael Tschiemer.
The rc Puma as flown by Michael Tschiemer, pictured above, is 73" long and powered by a Zenoah 25ccm engine. Weight is around 26 1/2 lbs.
RC Puma from Baumann.
The rc Puma from Bauman is available in short and long tail versions. Construction is from epoxy and it has a gel coated surface. Short length is 67", and long
length is 71". Its width is 9 1/2" and its height 15 1/2". All up weight is around 14 lbs.
The rc Puma shown in the following three pictures are of another Mr. Hino project. It is a conversion from a 1:32 scale Revell plastic kit. Length is 22 3/4",
height is 6 1/2", rotor diameter is 19" and weight is 13.5 oz. Propulsion comes from a Hacker B20-36S motor, Century Humming Bird mechanics, and a Kyosho rotor.
RC Puma hovering.
RC Puma maneuvering.
RC Puma held by Mr. Hino.
If there is a rc Puma that you can recommend, please email us.
|
| |
|
|
|
|
|
|
|
|
 |
