RC Bell 407
Click on the rc Bell 407 picture for the wav sound.
RC Bell 407 from Sky Hunter Hobby
Sky Hunter Hobby has a rc Bell 407 fuselage kit for 90 size gas or 700 size electric mechanics. It is available unpainted and in a variety of color schemes. Length is 61 1/2" with rotor diameters from 53" to 65". Weight, all up, should be around 13 lbs.
The Bell 407 medium-light utility helicopter is known for its low noise levels, good maneuverability, steady hover, and smooth ride. It is a favorite as a water bomber, camera platform, with police departments, with the military, as a hospital and VIP transport.
RC Bell 407 from the Roban Model
The rc Bell 407 from the Roban Model is made to accept 450 mechanics with a 1800 kV motor. It is 35 1/2" long and weighs about 2 1/2 lbs.
The key to the smooth performance of the Bell 407 is its fiberglass carbon composite four blade main rotor and vibration dampening hub design. The rotor is turned by an engine that develops more power than its predecessor and is more efficient in lower air densities. The entire fuel system of the helicopter has been reinforced for greater safety.
RC Bell 407 from Cloneparts.de
The rc Bell 407 from Cloneparts.de is 32" long, 8" high, and 11" wide. Its four main rotor blades are 12 1/2" long each. A 2,000 kV motor is suggested for power. All up weight is around 42 oz.
The Bell 407 cabin is wider than on prior models for additional passenger comfort or load accommodation, while still seating five. It can easily be configured according to need.
RC Bell 407 from Super Scale Helis
The rc Bell 407 from Super Scale Helis is a 1/4 scale helicopter with a length of 103". It has a glass fibre fuse with carbon reinforcements that comes in eight pieces. Recommended power is a Jakadofsky Pro 5000 turbine engine with Hauer mechanics.
The Bell 407 cockpit is spacious and provides excellent visibility. The helicopter is optionally available with a Garmin equipped all-glass cockpit. Instruments are logically laid out and provide a clear indication of engine output in relation to demand. The engine speed control is mounted on the collective tube. Engine speed is digitally controlled for greater efficiency.
RC Bell 407 from Just Scale
The Just Scale rc Bell 407 is made for 90 size mechanics. The helicopter is 65" long and can use from 53" to 65" rotors.
When flown as a water bomber, the Bell 407 usually is equipped with a 238 gallon bucket suspended beneath the helicopter.
RC Bell 407 from RC Aerodyne
RC Aerodyne's rc Bell 407 uses 450 mechanics and comes with a scale interior. It is 32" long, 8" high, and 11" wide. It uses four 13" rotor blades. All up weight is around 2 3/4 lbs.
A Bell 407 flew around the world, crossing the North and South Poles, completing the circumnavigation on May 23, 2007.
Iraq is the biggest user of Bell 407 helicopters outside of the United States. Not only did Bell sell thirty helicopters for use in Iraq, but they have contracted with the U.S. Army to provide support services for them.
About 1,100 Bell 407 helicopters have been produced to date.